The store will not work correctly when cookies are disabled.
Canusa
Canusa CPX 100 Heat Shrink Tubing
Looking for a less expensive alternative? Try BuyHeatShrink 2:1 Heat Shrink Tubing
NOTE - THERE IS A 1-2 WEEK LEAD TIME
Features
-
2:1 Shrink Ratio (shrinks to ½ its original diameter)
-
Meets requirements of SAE AMS-DTL-23053/5 (formerly MIL-I-23053/5, MIL-DTL-23053/5), Classes 1, 2 (Clear), and 3
-
UL 224
VW-1 and CSA OFT recognized
-
Maximum Continuous use temperature 135°C
-
Shrink Temperature of 120°C and operating temperature of -55°C to + 135°C
-
Crosses to : Sumitomo B2, Raychem RNF-100, Alpha FIT-221, 3M FP-301, LG GSHS-1635F
-
Typical applications include: Insulation, Wire Identification, Wire Bundling, Mechanical Protection, Color Coding, Lightweight Harnessing, Physical/Electrical Protection of Components, Strain Relief, and Solder Insulation.
Diameter |
MFR Part Number | Mil Specification | Flat Width | ID after shrinking |
Buy |
1/16" |
CPX-100-0063 | AMS-DTL-23053/5-102 | 1/8" | 0.031" |
|
3/32" |
CPX-100-0094 | AMS-DTL-23053/5-103 | 1/8" | 0.047" |
|
1/8" |
CPX-100-0125 | AMS-DTL-23053/5-104 | 3/16" | 0.063" |
|
3/16" |
CPX-100-0187 | AMS-DTL-23053/5-105 | 5/16" | 0.094" |
|
1/4" |
CPX-100-0250 | AMS-DTL-23053/5-106 | 3/8" | 0.125" |
|
3/8" |
CPX-100-0375 | AMS-DTL-23053/5-107 | 9/16" | 0.188" |
|
1/2" |
CPX-100-0500 | AMS-DTL-23053/5-108 | 13/16" | 0.250" |
|
3/4" |
CPX-100-0750 | AMS-DTL-23053/5-109 | 1-3/16" | 0.375" |
|
1.5" |
CPX-100-1500 | AMS-DTL-23053/5-111 | 2-3/8" | 0.750" |
|
2" |
CPX-100-2000 | AMS-DTL-23053/5-112 | 3-1/8" | 1.00" |
|
Features
-
2:1 Shrink Ratio (shrinks to ½ its original diameter)
-
Meets requirements of SAE AMS-DTL-23053/5 (formerly MIL-I-23053/5, MIL-DTL-23053/5), Classes 1, 2 (Clear), and 3
-
UL 224
VW-1 and CSA OFT recognized
-
Maximum Continuous use temperature 135°C
-
Shrink Temperature of 120°C and operating temperature of -55°C to + 135°C
-
Crosses to : Sumitomo B2, Raychem RNF-100, Alpha FIT-221, 3M FP-301, LG GSHS-1635F
-
Typical applications include: Insulation, Wire Identification, Wire Bundling, Mechanical Protection, Color Coding, Lightweight Harnessing, Physical/Electrical Protection of Components, Strain Relief, and Solder Insulation.
Nominal ID |
MFR's Part Number |
AMS-DTL-23053 |
Flat Width |
|
1/16" |
CPX-100-0063 |
AMS-DTL-23053/5-102 |
1/8" |
0.031" |
3/32" |
CPX-100-0094 |
AMS-DTL-23053/5-103 |
1/8" |
0.047" |
1/8" |
CPX-100-0125 |
AMS-DTL-23053/5-104 |
3/16" |
0.063" |
3/16" |
CPX-100-0187 |
AMS-DTL-23053/5-105 |
5/16" |
0.094" |
1/4" |
CPX-100-0250 |
AMS-DTL-23053/5-106 |
3/8" |
0.125" |
3/8" |
CPX-100-0375 |
AMS-DTL-23053/5-107 |
9/16" |
0.188" |
1/2" |
CPX-100-0500 |
AMS-DTL-23053/5-108 |
13/16" |
0.250" |
3/4" |
CPX-100-0750 |
AMS-DTL-23053/5-109 |
1-3/16" |
0.375" |
1" |
CPX-100-1000 |
AMS-DTL-23053/5-110 |
1-9/16" |
0.500" |
1-1/2" |
CPX-100-1500 |
AMS-DTL-23053/5-111 |
2-3/8" |
0.750" |
2" |
CPX-100-2000 |
AMS-DTL-23053/5-112 |
3-1/8" |
1.00" |
3" |
CPX-100-3000 |
AMS-DTL-23053/5-113 |
4-3/4" |
1.50" |
4" |
CPX-100-4000 |
AMS-DTL-23053/5-114 |
6-5/16" |
2.00" |
HS-CPX100 |
Canusa Heat Shrink Tubing |
HS-CPX100-0063-BK |
Canusa CPX100 1/16" x 1000' Thin Wall Cross-linked FP Heat Shrink Tubing |
HS-CPX100-0094-BK |
Canusa CPX100 3/32" x 250' Thin Wall Cross-linked FP Heat Shrink Tubing |
HS-CPX100-0125-BK |
Canusa CPX100 1/8" x 500' Thin Wall Cross-linked FP Heat Shrink Tubing |
HS-CPX100-0188-BK |
Canusa CPX100 3/16" x 250' Thin Wall Cross-linked FP Heat Shrink Tubing |
HS-CPX100-025-BK |
1/4 inch Canusa CPX-100-025 (200 ft/spool) - Black |
HS-CPX100-0375-BK |
3/4 inch Canusa CPX-100 (200 ft/spool) - Black |
HS-CPX100-050-BK |
Canusa CPX100 1/2" x 200' Thin Wall Cross-linked FP Heat Shrink Tubing |
HS-CPX100-075-BK |
Canusa CPX100 3/4" x 200' Thin Wall Cross-linked FP Heat Shrink Tubing |
HS-CPX100-150-BK |
Canusa CPX100 1.5" x 100' Thin Wall Cross-linked FP Heat Shrink Tubing |
HS-CPX100-200-BK |
Canusa CPX100 2" x 100' Thin Wall Cross-linked FP Heat Shrink Tubing |